nkk switches ? email: sales@nkkswitches.com ? phone (480) 991-0942 ? fax (480) 998-1435 ? www.nkkswitches.com 02-08 process sealed ultra-miniature toggles series g distinctive characteristics ultra-miniature size allows high density mounting, and extremely light weight of 0.25 gram makes these switches ideal for handheld equipment. totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. molded-in, epoxy sealed terminals lock out fux, solvents, and other contaminants. award-winning stc contact mechanism with benefts unavailable in conventional mechanisms: smooth, positive detent actuation, increased contact stability, and unparalleled logic-level reliability. (additional stc details in terms & acronyms; see supplement section.) .100 x .100 (2.54mm x 2.54mm) terminal spacing conforms to standard pc board grid spacing. round terminals facilitate easier through-hole mounting on pc boards. matching indicators available and shown at the end of section m. g series illuminated toggles also appear in the illuminated other section m. actual size
nkk switches ? email: sales@nkkswitches.com ? phone (480) 991-0942 ? fax (480) 998-1435 ? www.nkkswitches.com 02-08 process sealed ultra-miniature toggles series g general specifcations electrical capacity (resistive load) logic level: other ratings contact resistance: insulation resistance: v dielectric strength: v a mechanical life: electrical life: nominal operating force: angle of throw: materials & finishes actuator: case: sealing rings: movable contacts: stationary contacts: base: terminals: support bracket: environmental data operating temperature range: humidity: vibration: h shock: pcb processing soldering: a a cleaning: standards & certifications ul recognition or csa certifcation:
nkk switches ? email: sales@nkkswitches.com ? phone (480) 991-0942 ? fax (480) 998-1435 ? www.nkkswitches.com 02-08 process sealed ultra-miniature toggles series g poles 1 spdt 2 dpdt typical switch ordering example 1 g spdt on-off-on circuit toggle position ( ) = momentary connected terminals throw & schematics pole model up center down up center down note: terminal numbers are not actually on the switch. sp g12 g13 g15 g18 g19 on on on (on) on none off none off off on on (on) (on) (on) 5-6 open 5-4 spdt dp g22 g23 g25 g28 g29 on on on (on) on none off none off off on on (on) (on) (on) 5-6 2-3 open 5-4 2-1 dpdt circuits 2 on none on 3 on off on 5 on none (on) 8 (on) off (on) 9 on off (on) ( ) = momentary 3 description for typical ordering example g13ah poles & circuits a .150 (3.8mm) column toggle h actuator a .150 (3.8mm) column toggle right angle pc terminals slot slot pc terminals p straight h right angle v vertical 5 (com) 6 4 (com) 6 4 5 1 2 3 actuator a .150 (3.8mm) column toggle (4.0) dia .157 (1.7) dia .067 28? (3.8) .150
nkk switches ? email: sales@nkkswitches.com ? phone (480) 991-0942 ? fax (480) 998-1435 ? www.nkkswitches.com 02-08 process sealed ultra-miniature toggles series g pc terminals p h v straight right angle typical switch dimensions g19ap on single pole models, locations 1 & 3 are for support pins. g19ah (2.54) ty p .100 (2.6) .102 (2.54) ty p .100 (0.4) dia ty p .016 (7.0) .276 (4.5) .177 (0.4) dia ty p .016 (2.54) ty p .100 (7.0) .276 (4.5) .177 (2.54) ty p .100 (0.5) ty p .020 (4.5) .177 (7.0) .276 (0.5) ty p .020 (2.54) ty p .100 (2.54) ty p .100 (0.4) dia ty p .016 g22av slot (4.5) .177 28? (1.7) dia .067 (4.0) dia .157 (0.4) dia ty p .016 (3.8) .150 (2.6) .102 (7.0) .276 (1.6) .063 (2.54) ty p .100 4 5 6 1 2 3 (7.0) .276 (2.54) .100 slot (5.08) .200 (7.8) .307 (0.4) dia ty p .016 (1.7) dia .067 (4.0) dia .157 (2.6) .102 (0.5) .020 (2.54) .100 (5.08) .200 (1.6) .063 (10.22) .402 (3.8) .150 32 1 4 5 6 (0.4) .016 (4.9) .193 (0.4) dia ty p .016 (7.0) .276 (2.54) ty p .100 slot (5.3) .209 (2.54) .100 (0.4) dia ty p .016 28? (1.7) dia .067 (4.0) dia .157 (2.6) .102 (0.5) ty p .020 (2.54) ty p .100 (1.6) .063 (3.8) .150 (1.0) .039 (5.08) .200 (12.76) .502 4 5 6 1 2 3 (7.4) .292 (2.54) .100 (4.5) .177 (0.4) dia ty p .016 (0.4) .016 (0.6) dia ty p .024 (2.54) ty p .100 (2.54) .100 4 5 6 (0.6) dia ty p .024 (2.54) ty p .100 (2.54) .100 1 2 3 4 5 6 (0.6) dia ty p .024 (2.54) ty p .100 45 6 (5.08) .200 (0.6) dia ty p .024 (2.54) ty p .100 (2.54) .100 12 3 45 6 (5.08) .200 (0.6) dia ty p .024 (5.08) .200 (2.54) ty p .100 (2.54) .100 1 2 3 4 5 6 (0.6) dia ty p .024 (5.08) .200 (2.54) ty p .100 (2.54) .100 4 5 6 c l vertical 28? straight pc single & double pole right angle pc single & double pole vertical pc single & double pole
|
